From trash to treasure: Silicon waste finds new use in Li-ion batteries
Fig. 1 Fabrication of electrode with Si swarf/graphite sheet composites (credit: Osaka University)

Li-ion batteries (LIBs) are widely used in mobile electronics. Concerns of global warming and climate change have recently boosted the demand for LIBs in electric vehicles and solar photovoltaic output smoothing. Si has been studied as an active material with a high theoretical capacity of 3578 mAh/g, which is around ten times higher than that of graphite (372 mAh/g).

Now, a team of researchers at Osaka University has used flake-shaped Si nanopowder wrapped by ultrathin graphite sheets (GSs) to fabricate LIB electrodes with high areal capacity and current density.

Generally treated as industrial waste, Si swarf is generated at a rate of 100,000 tons per year globally from Si ingots that are produced from silica through processes at 1000~1800°C. Water-based coolants and fixed abrasive grain wire saws are paving the way to the use of Si swarf as an anode active material with a high capacity at a reduced cost.

Nano carbon materials have been applied to Si electrodes to improve electrical conductivity and cyclability. Many strategies for dealing with large volume change of Si electrodes at relatively high costs have been demonstrated. However, the Si electrodes do not combine all the requirements for high electrode performance, namely reduced cost, environmental friendliness of materials and processes, and circular economy.

From trash to treasure: Silicon waste finds new use in Li-ion batteries
Fig. 2 Transmission electron microscope image of Si swarf/graphite sheet composites (credit: Changed partly from the original figure with CC BY 4.0.)

“In this study, Si/graphite sheet composites from Si swarf and expanded graphite are used as the active material with reduced cost and thermal budget (Fig. 1). Si nanopowder is dispersed and wrapped between GSs fabricated from expanded graphite (Fig. 2),” explains first author Jaeyoung Choi. “GS bridges are formed across cracks and suppress cracking and peeling-off of Si. Agglomerated GSs wrap Si/GS composites, and work as stable frameworks that secure electrolyte paths and buffer spaces for Si volume change.”

The Si/GS composite structure and the delithiation limitation improve the cyclability up to 901 cycles at 1200 mAh/g. The areal delithiation capacity and current density of the Si/GS electrodes linearly increase to 4 mAh/cm2 and 5 mA/cm2, respectively, with the mass loading for more than 75 cycles (Fig. 3), while thick electrodes with C-coated Si fabricated in C2H4 are not competitive.

From trash to treasure: Silicon waste finds new use in Li-ion batteries
Fig. 3 Cycle performance of thick electrode with Si swarf/graphite sheet (GS) composites and C-coated Si. C-coated Si was fabricated in C2H4 at 1000°C. (credit: CC BY 4.0.)

“Si anode batteries with high capacity and high current density have the potential to be used in electric vehicles. This potential, combined with increasing generation of Si swarf as industrial waste, will allow our work to contribute to reduced greenhouse gas emissions and the achievement of SDGs,” says corresponding author Taketoshi Matsumoto.


Scientists improve cycling performance of Al-based batteries with high areal density cathode


More information:
Jaeyoung Choi et al. Si Swarf Wrapped by Graphite Sheets for Li-Ion Battery Electrodes with Improved Overvoltage and Cyclability, Journal of the Electrochemical Society (2021). DOI: 10.1149/1945-7111/abdd7e

Provided by
Osaka University

Citation:
From trash to treasure: Silicon waste finds new use in Li-ion batteries (2021, February 9)
retrieved 9 February 2021
from https://phys.org/news/2021-02-trash-treasure-silicon-li-ion-batteries.html

This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no
part may be reproduced without the written permission. The content is provided for information purposes only.